Advertisement
You are not using the correct settings
It is very important to use the correct settings on your Philips Lumea, suitable for your skin
tone. Always check the skin tone/hair colour table in the user manual.
Some Philips Lumea models (BRI862, BRI863, BRI864, BRI94, BRI95 series) are equipped
with a SmartSkin Sensor. The sensor recommends the setting which was comfortable for most
women with a skin tone similar to yours. If the treatment feels uncomfortable with these settings
you can always lower them manually.
You are missing spots
While treating your skin with Philips Lumea, make sure you cover all skin areas and do not miss
any spots. Move your Lumea about 1 cm up or down after each flash to avoid missing any spots.
The rim around the treatment window should overlap.
You did not clean your Lumea
Clean your Philips Lumea after every usage to extend its lifetime and to avoid burnt spots. For
proper cleaning instructions refer to your user manual.
Advertisement
