Assembling The Light Exit Unit; Assembling The Bottom Plate Of The Base - Olympus CH2 Series Repair Manual

5. Assembling the light exit unit
5-l. Place the microscope upside down and fasten
the light exit unit with 3 screws (CUK2.6 x
1OSA).
6.
Assembling the bottom plate of base
6-l.
6-2.
Fasten the ground wire (green) with
(AB4 x 12SA).
Mount the bottom plate (W -BDS-C2,
on the base with 4 screws (AB4 x 12SA)
-BDT)
-38-