Bauer Magnum LP Series Operating Manual page 11

If the locking lever is lifted or not engaged, move the pump with the cable winch until it rests in the gap ...
The pump is now ready for operation.
Operating Manual for BAUER Long Shaft Pump
Mount the guiding clamp(s) again with the locking lever.
Take off the cable pulley from the drive pipe of the pump
(by detaching the split pin).
Slightly unwind the cable on the cable winch and insert
into the cable pulley and push it back onto the bolt, then
secure with disc and split pin.
Insert the pump with the
drive pipe showing
downward into the support of
the lift pole..
Fold up the support fork and
lock with the stop pin.
11