SEM 200 Operation And Maintenance Manual page 15

Rear deflector
Rear bed knife clamp
Bed knife
Drive plate
Tools and PPE Required:
•
Cut resistant gloves
• 7/16", 1/2" wrench or socket wrench
•
5/16" Allen drive socket bit
•
4-6" socket wrench extension
•
Torque wrench compatible with sockets listed above
•
.001" feeler gauge
Spare Knives and Sharpening: To avoid downtime, it is always best to have a spare set of sharp knives
on hand. SEM offers spare knives and sharpening services. Contact SEM customer service at 1-800-225-
9293.
Screen: It is recommended, but not required, to remove the screen from the chamber while changing
.
the knives
Figure 6.7: Exploded chamber
15
semshred.com | 508.366.1488
Front deflector
Front bed knife clamp
Bed knife