Auto Calibration - Zmorph VX Quick Start Manual

Autocalibration
Take the calibration cable
1
and connect wider end to the
RIGHT frame socket.
Choose "Calibrate".
4
Set the printing temperature
7
to the PLA material., Nozzle
200 0C, Bed 60 0C.
Connect the narrow end
2
of the calibration cable to
X-carriage B socket.
Choose "Auto 3-point". Wait
5
for the machine to heat up
and finish the probing.
If your filament is not loaded,
8
feed it using arrows on the
screen. If your filament is
already loaded choose "Next".
Choose "Maintenance".
3
To ensure best calibration
6
result print calibration
pattern. Choose "Start".
Wait for the machine to
9
finish printing pattern.