First Print - Zmorph VX Quick Start Manual

First print

Choose "New Job" from the
1
LCD touchscreen.
Apply 3D printing adhesive to
4
the center of the worktable.
Two layers should be
enough.
Click "Play" to start printing.
7
Select the Astronaut file to
2
print. It is located in
"INTERNAL -> EXAMPLES ->
SINGLE EXTRUDER" folder.
Wait until the printer heats up
5
automatically.
Congratulations, you just
8
started your first print.
Choose "Prepare Bed".
3
Attach the cooling fan to the
6
X-carriage. Remember, when
printing with PLA always use
cooling fan.