D-Link Vpn Configuration - Digi Connect Series Application Manual

How to create a vpn between digi and d-link

Hide thumbs Also See for Connect Series:

Table of Contents

Digi Connect Family Application Guide – Digi to D-Link

iv. Click Apply after filling in the above information to complete the

tunnel setup on the Digi Connect router.

D-Link VPN Configuration

1. Configure the D-Link VPN device

a. Log into the Web Interface of the D-Link device.

b. Navigate to Firewall > VPN.

c. Click Add New under the section called IPsec Tunnels.

d. Fill in the appropriate information show in the following screenshots

5/11/2009

Digi International

3 of 6

Table of Contents

Do you have a question about the Connect Series and is the answer not in the manual?

Connectport x4 znet 2.5 2g gsm intlConnect wan vpn gsm edge Connect wan 4g iaConnectport x4 ia 802.15.4 ethernet & cellular (edge)Connectport x4 gprs 868 internationalConnectport x4 802.15.4 2g gsm ... Show all