Table of Contents
Advertisement
WPC System
USER GUIDE
Landing the Array
Landing an array is simply a reversal of the rigging procedure outlined above, lowering the array and guiding the bottom four
cabinets into a WPC Transport Dolly, unpinning the lower block of four, and repeating with the top four cabinets.
” Lower the array to a convenient working height. Disconnect the speaker cables. Position a WPC Transport Dolly underneath
the array, and remove the top and supporting poles.
” Lower the array further, and guide it into the Transport Dolly until the bottom cabinet is seated fully in the tray. Remove the
LOCK pins from the bottom four cabinets, allowing the cabinets to collapse down until the trapezoidal sides are touching.
Fig. 30 - lower array
WPC User Guide v1.0
Fig. 31 - lower array
Page 46
Advertisement
Table of Contents
