inadvertently short your terminal connections to the grounded enclosure.
Note 2: The range of the suitable electric wire is from 12 to 24 AWG.
2.3
Wiring I/O Connectors
Follow the pin assignment to insert the wires into the front contacts on the terminal block
connector. Tighten the wire-clamp screws to prevent the I/O wires from being loosened.
The wiring diagram of the JetI/O 6510 is as below:
Pin No
V4+
Analog input CH4+
V4-
Analog input CH4-
V5+
Analog input CH5+
V5-
Analog input CH5-
V6+
Analog input CH6+
V6-
Analog input CH6-
V7+
Analog input CH7+
V7-
Analog input CH7-
2.4
JetI/O 6510 Wiring Example
2.4.1 JetI/O 6510 analog Voltage input wiring example
2.4.2 JetI/O 6510 analog Current input wiring example
Description
Pin No
V0+
Analog input CH0+
V0-
Analog input CH0-
V1+
Analog input CH1+
V1-
Analog input CH1-
V2+
Analog input CH2+
V2-
Analog input CH2-
V3+
Analog input CH3+
V3-
Analog input CH3-
Description
6