Hella Gutmann mega macs PC Quick Start Manual page 24

Working with the mega macs PC
Diagnostics
5. Insert the PC VCI into the vehicle's diagnostic port.
Both LEDs of the PC VCI flash. The PC VCI is ready for operation.
6. Select >Diagnostics< in the main menu.
Now you can select the type of diagnostics.
8.2.2 Performing Diagnostics
Proceed as follows to perform diagnostics:
1. Perform steps 1 to 5 as described in section Preparing vehicle
diagnostics (Page 22).
2. Use
and System.
3. Observe the information window, note window and instruction window
as applicable.
4. Start the communication with .
The diagnostic procedure between the mega macs PC software and the
PC VCI is realized with Bluetooth.
Connection to the PC VCI is established if the
black to green.
5. Repair the vehicle. Then delete the saved trouble codes from the
vehicle system.
8.2.3 Calling Up Vehicle Information
Here you have an overview of the vehicle information including the
following:
24
to select the desired diagnostics under Function, Assembly
mega macs PC
symbol changes from