Installation And Connection; The Imager Head And Cable Installation; Accessories Installation - Sealey Auto Service VS8197.V2 Instructions Manual

Video bore scope

Table of Contents

3. Installation and Connection

To use the tool, the imager head and cable must be connected to the display

unit. To connect the cable to the display unit, make sure the key and slot

(Fig. 4) are properly aligned. Once they are aligned, tighten the knurled

knob to hold the connection firmly in place.

The two accessories include a magnet and a mirror (Fig.2). Both of the

accessories are attached to the imager head in the same manner, here we are

showing you how to attach the accessories using a magnet as an example.

Hold the imager head as shown in Fig.5

Screw the accessory onto the imager head to fix (Fig. 6).

Page 10

Fig.4

Fig. 5

Original Language Version

VS8197.V2

Issue: 1 - 23/11/11

Table of Contents