Sealey Auto Service VS8197.V2 Instructions Manual
Sealey Auto Service VS8197.V2 Instructions Manual

Sealey Auto Service VS8197.V2 Instructions Manual

Video bore scope

Advertisement

Quick Links

thank you for purchasing a Sealey Heater. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: pLeAse reAd THese iNsTrUcTioNs cAreFULLY. NoTe THe sAFe operATioNAL
reQUireMeNTs, WArNiNGs ANd cAUTioNs. Use THis prodUcT correcTLY ANd WiTH cAre For THe
pUrpose For WHicH iT is iNTeNded. FAiLUre To do so MAY cAUse dAMAGe ANd/or persoNAL
iNJUrY ANd WiLL iNvALidATe THe WArrANTY. pLeAse Keep iNsTrUcTioNs sAFe For FUTUre Use.
1. Safety Instructions ...............................................................................2
1.1 Work Area Safety .......................................................................2
1.2 Electrical Safety .........................................................................2
1.3 Battery Safety .............................................................................3
1.4 Personal Safety ...........................................................................3
2.1 Description ..................................................................................4
2.2 Specifications ..............................................................................5
2.3 Accessories Included ..................................................................6
2.4 Tool Components ........................................................................7
2.5 Buttons and Ports .......................................................................8
3. Installation and Connection ..............................................................10
3.1 The Imager Head and Cable Installation ..............................10
3.2 Accessories Installation ............................................................10
3.3 SD Card Installation ................................................................11
3.4 USB Cable Connection ............................................................11
3.5 Video-Out Cable Connection ..................................................11
3.6 Earphone Connection ..............................................................11
4. Battery Charging Precautions ..........................................................12
4.1 Battery Charging Safety ..........................................................12
4.2 Battery and Charger Specifications........................................12
4.3 Charger Inspection ..................................................................12
4.4 Battery Charging Procedures .................................................13
5. Operation Instructions ......................................................................14
5.1 Basic Operation ........................................................................14
5.2 Operation Precautions .............................................................15
5.3 Tool Inspection .........................................................................16
5.4 Tool and Work Area Set-Up ....................................................17
5.5 On Screen Navigation ..............................................................18
5.6 Icons ..........................................................................................24
5.7 Software Update .......................................................................31
6. Troubleshooting ..................................................................................32
Page 1
InStructIonS for:
video bore scope
Model no. vs8197.v2

Table of Contents

Original Language Version
Issue: 1 - 23/11/11

Advertisement

Table of Contents
loading

Summary of Contents for Sealey Auto Service VS8197.V2

  • Page 1: Table Of Contents

    Model no. vs8197.v2 thank you for purchasing a Sealey Heater. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: pLeAse reAd THese iNsTrUcTioNs cAreFULLY. NoTe THe sAFe operATioNAL reQUireMeNTs, WArNiNGs ANd cAUTioNs.
  • Page 2: Safety Instructions

    7. Warranty Information ...............32 7.1 Service Procedures ..............32 1. Safety Instructions 1. Safety Instructions IMPORTANT: To prevent electric shock, fire and/or personal injury or damage, read this user’s manual first and observe the following safety instructions. 1.1. Work Area Safety •...
  • Page 3: Battery Safety

    electrician, using a Portable Appliance Tester (PAT), at least once a year. 1.2.2.The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and the safety of the appliance operator. If in any doubt about electrical safety, contact a qualified electrician.
  • Page 4: Description, Specifications And Tool Components

    Maintain the bore scope in good and clean condition for best and safest performance.  A full range of personal safety equipment is available from your Sealey dealer.  Account for all tools and parts being used and do not leave any in, or near, the engine.
  • Page 5: Specifications

    battery pack giving up to 5 hours continuous use. Supplied in foam-lined carry-case. 2.2 Specifications Recommended use Indoor Optimal viewing 3/8” to 12” (0.95cm to 30cm) Distance Image capture 640 x 480 Screen type display 3.5” TFT LCD Display resolution 320 x 240 Built-in rechargeable lithium-ion battery pack (3.7 Power supply Volt) Estimated battery life...
  • Page 6: Accessories Included

    Storage temp. -4°F to 158°F (-20°C to 70°C) Operating humidity 5% - 95% non-condensing (display unit) Video output 2.3 Accessories Included 1) Protective carrying case 2) USB cable 3) Video-out cable 4) Charger 5) Magnet and mirror 6) Imager head and cable (5.5mm) 7) User’s Manual 2.4 Tool Components Note: Because of continuing improvements, actual product may differ...
  • Page 7 Fig. 1 LCD Screen – Indicates still images and videos. Cable – Connects to the tool while in use. Cable Connector – Connects the display unit to the imager head and cable. Imager Head – Connects to the cable to view real time images. Rubber Boot –...
  • Page 8: Buttons And Ports

    Accessory Mirror – Helps users look around corners and see inside the unreachable areas. 2.5 Buttons and Ports Fig. 3 Power Button – Turns on/off the tool. Setting/Back Button – Moves to the primary settings screen, while pressing again will return to the last viewed screen. Camera/Video Button –...
  • Page 9 RIGHT Arrow LED Lighting Adjusting Button – Uses right arrow button to increase LED brightness in the camera mode. UP Arrow Zoom Adjusting Button – Uses up arrow button to zoom in while in the camera mode. DOWN Arrow Zoom Adjusting Button – Uses down arrow button to zoom out while in the camera mode.
  • Page 10: Installation And Connection

    3. Installation and Connection 3. Installation and Connection 3.1 The Imager Head and Cable Installation To use the tool, the imager head and cable must be connected to the display unit. To connect the cable to the display unit, make sure the key and slot (Fig.
  • Page 11: Sd Card Installation

    Fig. 6 3.3 SD Card Installation NOTE: SD card slot provides for additional memory (not included). To insert an SD card into the SD card slot, make sure the contacts are facing towards slot and the angled portion of the card is facing down. When the SD card is installed, a small SD card icon will appear at the top right hand corner of the screen.
  • Page 12: Battery Charging Precautions

    4. Battery Charging Precautions 4. Battery Charging Precautions IMPORTANT: To reduce the risk of serious injury, read these precautions and the label on charger carefully before using. 4.1 Battery Charging Safety DO NOT use charger if it has been dropped or damaged in any way. Charge battery in temperatures above 41°F (5°C) and below 113°F (45°C).
  • Page 13: Battery Charging Procedures

    This helps prevent the tool from slipping from your hands and allows proper ventilation. Inspect if the warning label on charger’s surface is intact and readable. Select appropriate location for charger before using. Check work area for: • The charger must be between 41°F (5°C) and 113°F (45°C) for charging. •...
  • Page 14: Operation Instructions

    5. Operation Instructions 5. Operation Instructions IMPORTANT: Always wear safety eye protection to protect your eyes against dirt and other objects. Follow operation instructions to reduce the risk of injury from electric shock, entanglement and other causes . 5.1 Basic Operation NOTE: When in operation, the cable can be bent into different shapes.
  • Page 15: Operation Precautions

    5.2 Operation Precautions • Use the tool only as directed. Do not operate the tool unless the user’s manual has been read thoroughly and proper training has been completed. • The display unit is not waterproof. The imager head and cable are waterproof, but not acid-proof or fireproof. Avoid submersing the imager head and cable into corrosive, oily places and be sure to keep the imager head and cable away from high temperature objects.
  • Page 16: Tool Inspection

    5.3 Tool Inspection WARNING: Before using, inspect the scope and correct any problems to reduce the risk of serious injury from electric shock and other causes and prevent tool damage. • Make sure the power is OFF. • Clean any oil, grease or dirt from the tool, especially on the buttons and ports. This helps prevent the tool from slipping from your hands.
  • Page 17: Tool And Work Area Set-Up

    5.4 Tool and Work Area Set-Up CAUTION: Set up the scope and work area according to these procedures to reduce the risk of injury from electric shock, entanglement, and other causes and prevent tool damage. Check work area for: • Sufficient lighting.
  • Page 18: On Screen Navigation

    5.5 On Screen Navigation Splash Screen When the tool is powered on, the first screen displayed is referred to as the splash screen. This screen tells you the tool is booting up. Once the tool is fully powered up, the screen will automatically switch to the live screen. Live Screen The live screen is where you will do most of your work. A live image of what the imager head sees is displayed on the screen.
  • Page 19 Zooming Press UP and DOWN arrow buttons while in the still camera mode to zoom in or out. A zoom indicator bar will be displayed on the screen as you adjust zoom. (Fig. 8) Fig. 8 Entering the Primary Settings Screen Pressing the Setting button while in the live screen will take you to the primary settings screen.
  • Page 20 Capturing a Photo When in the live screen, make sure the camera icon is present at the top left portion of the screen. (Fig. 10) Press OK button to capture a photo and the photo will be saved to the internal memory or SD card. You will also notice that the number of total photos displays below the camera icon.
  • Page 21 LEFT and RIGHT arrow buttons to move from Photo mode to Video mode. (Fig. 12 and Fig. 13) Fig. 12 Fig. 13 While in the photo mode, press OK button and use LEFT and RIGHT arrow buttons to play back captured photos one after another, use UP and DOWN arrow buttons to zoom in and out.
  • Page 22 OK button will • While in the photo mode, selecting a photo and pressing appear record mode in the middle of the screen. (Fig. 14) Fig. 14 OK button will • Inserting the optional earphone with microphone and pressing begin recording (Fig. 15) and timing. Fig.
  • Page 23 playing recording. Photo mode or in the Video mode, press Bin button to delete • Either in the captured photos and videos, and a “Are you sure you want to delete this file?” message appears on the screen. (Fig. 19 and Fig. 20). Use LEFT and RIGHT arrow buttons to select Yes or No, then press OK button to save your selection.
  • Page 24: Icons

    10) Entering the Secondary Settings Screen While in the Primary Settings Screen (Fig. 9), select Advanced Settings from Setup and then press OK, you will enter the secondary settings screen (Fig. 21) where you can set Date and Time, Restore Defaults and select Language as needed.
  • Page 25 Fig. 22 • Advanced Settings from Setup and press OK button to modify Select advanced settings. Fig. 23 UP and DOWN arrow buttons to select Date and • When necessary, use Time, Restore Defaults and Language from Advanced Settings. – Displays colour or black/white.  Colour is the default mode.
  • Page 26 Fig. 24 • LEFT and RIGHT arrow buttons to select from Colour mode to Black/ White mode, then press OK button to save your selection. • If you wish to view or capture colour images and videos, select Colour from Setup.
  • Page 27 Format Media from Setup and press OK button. • Select Fig. 27 Format Media from Setup and press OK • If you wish to format media, select button and then use LEFT and RIGHT arrow buttons to select Yes, then press OK button to save your selection.
  • Page 28 Fig. 30 • No to r eturn t o pr evious m enu. If you do not wish to format media, select Fig. 31 – Displays firmware version. Help from Setup and press OK button to display Firmware Version. • Select Fig. 32 Original Language Version Page 28 VS8197.V2...
  • Page 29 Fig. 33 – Sets date and time. Advanced Settings, select Date and Time and press OK • When you enter button. Fig. 4 • UP and DOWN arrow buttons to set exact date and time, while using LEFT and RIGHT arrow buttons to move from one item to another and press OK button to save.
  • Page 30 Fig. 36 • LEFT and RIGHT arrow buttons If you wish to restore factory defaults, use to select Yes or No, then press OK button to save your selection. Fig. 37 • No to return to previous If you do not wish to restore factory defaults, select menu.
  • Page 31: Software Update

    5.7 Software Update NOTE: The tool supports software updates. 1) Format your SD card to FAT file format on a computer. 2) Visit our website www.sealey.co.uk and download software update file to your SD card. 3) Insert your SD card into the SD card slot. (See 3.3 SD Card Installation) 4) Press UP arrow button and then press Power button to turn on the tool.
  • Page 32: Troubleshooting

    7. Warranty Information Limited One Year Warranty Sealey warrants to its customers that this product will be free from all defects in materials and workmanship for a period of one (1) year from the date of the original purchase, subject to the following terms and conditions:...
  • Page 33 Put the cover back in place. Secure with the screws. Dispose of batteries according to local authority guidelines. under the Waste Batteries and Accumulators regulations 2009, Jack Sealey ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.
  • Page 34: Vs8197.V2

    VS8197.V2 Model/Type: ..................................Manufacturing Date / Serial number (optional): ......................... Manufacturer's authorised representative within the EC: Jack Sealey Ltd. Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk, IP32 7AR Conforms to the requirements of the following Directives, as indicated.

Table of Contents