Table of Contents
Advertisement
6. Troubleshooting
6. Troubleshooting
SYMPTOMS
Display is on, but does not
show image.
LEDs on imager head are dim
2
at max brightness, display
changes between black and
white, color display turns itself
OFF after a short period.
The tool will not turn on.
7. Warranty Information
7. Warranty Information
Limited One Year Warranty
Sealey warrants to its customers that this product will be free from all defects in
materials and workmanship for a period of one (1) year from the date of the original
purchase, subject to the following terms and conditions:
1)
The sole responsibility of Sealey under the Warranty is limited to either the
repair or, at the option of Sealey, replacement of the tool at no charge with
Proof of Purchase. The sales receipt may be used for this purpose.
2)
This warranty does not apply to damages caused by improper use, accident,
flood, lightning, or if the product was altered or repaired by anyone other than
the Manufacturer's Service Centre.
3)
Sealey shall not be liable for any incidental or consequential damages arising
from the use, misuse, of the tool.
4)
All information in this manual is based on the latest information available at the
time of publication and no warranty can be made for its accuracy or
completeness. Sealey reserves the right to make changes at any time without
notice.
7.1 Service Procedures
If you have any questions, please contact your local store, distributor or visit our
website at www.sealey.co.uk.
If it becomes necessary to return the tool for repair, contact your local
distributor for more information.
Page 32
POSSIBLE
REASONS
Cable connection is
loose.
Imager head is
covered by debris.
Low battery.
Dead battery.
Original Language Version
SOLUTIONS
Check and reattach.
Inspect the imager
head and clean if
necessary.
Charge battery.
Charge battery.
VS8197.V2
Issue: 1 - 23/11/11
Advertisement
Table of Contents
