Download Print this page
Sealey VS2072.V2 Instructions

Sealey VS2072.V2 Instructions

Diagnostic socket memory safe - eobd

Advertisement

Quick Links

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. safety
modern vehicles contain extensive electronic systems. you are required to check with the vehicle manufacturer, for any
specific instructions regarding the use of this type of equipment on each vehicle.
no liability will be accepted for damage / injury, where this product is not used in accordance with all instructions.
danger! be aWare, Lead-acid batteries generate eXPLosiVe gases dUring normaL battery oPeration. for tHis
reason, it is Very imPortant to read and foLLoW tHese instrUctions carefULLy, eacH time yoU Use tHe
memory safe.
Follow these instructions and those published by the battery and vehicle manufacturers, and the maker of any equipment you intend to
use in the vicinity of the battery. Remember to review warning marks on all products and on engines.
1.1.
PersonaL PrecaUtions
ensure that there is another person within hearing range and close enough to come to your aid, should a problem arise when working
9
near a lead-acid battery.
Wear safety eye protection and protective clothing. Avoid touching eyes while working near battery.
9
Have fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
9
Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush eye immediately with cool, clean
9
running water for at least 15 minutes and seek immediate medical attention.
Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit current
9
which is high enough to weld such items to the vehicle and cause severe burns.
ensure that hands, clothing (especially belts) are clear of fan blades and other moving or hot parts of engine. Remove ties and contain
9
long hair.
do not smoke or allow a spark or flame in the vicinity of the battery or engine.
8
1.2.
generaL safety
Familiarise yourself with the application, limitations and potential hazards of the unit. Also refer to the vehicle manufacturer's hand book.
9
IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN.
ensure that the unit is in good condition before use. If in any doubt do not use the unit and contact a qualified electrician.
9
only use recommended attachments and parts. To use unapproved items may be dangerous and will invalidate your warranty.
9
Keep tools and other items away from the engine and ensure that you can see the battery and working parts of engine clearly.
9
Keep children and unauthorised persons away from the work area.
9
do not disassemble the unit for any reason.
8
Warning! To prevent the risk of sparking, short circuit and possible explosion DO NOT drop metal tools in the battery area, or allow
them to touch the battery terminals.
do not cross-connect unit to battery. ensure positive (Red) clamp is to positive terminal and negative (blAcK) clamp is to negative
8
terminal.
do not use the unit outdoors, or in damp, or wet locations and do not use in the vicinity of flammable liquids or gases.
8
ensure there is effective ventilation to prevent a build-up of explosive gases.
9
do not use the unit for a task for which it is not designed.
8
When not in use, store the unit carefully in a safe, dry, childproof location.
9
2. introdUction
Attaches to a 12V slave battery and provides power via a eobd socket to on-board electronics whilst the vehicle's own battery is disconnected.
Features led to indicate backup battery power supply status. Saves valuable time spent reprogramming lost codes.
3. sPecification
model no: ............................................................. VS2072.V2
cable length: .............................................................. 1.35mtr
connection: .................................................................. eobd
© Jack Sealey limited
diagnostic socket memory safe - eobd
model no:
Warning
corrosive
substance
Original Language Version
Vs2072.V2
VS2072.V2 Issue 2 (F) 08/05/18

Advertisement

loading

Summary of Contents for Sealey VS2072.V2

  • Page 1 Vs2072.V2 model no: thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 The led should now illuminate red. The vehicle’s on-board electronics are now powered by the back-up battery and the vehicle’s battery can now be disconnected. note: If the red led does noT illuminate, check the clamps to the back-up battery and condition of the fuse in the VS2072.V2 fuse holder, see fig.1. If fuse is blown, replace with identical 5A fuse.