Operation; Care And Cleaning - HAMPTON BAY HB-7738-03 Use And Care Manual

Installation (continued)
Attaching the doorbell to the
6
back plate
Align the top edge of the doorbell (A) with the
top of the back plate (1).
Rotate the bottom of the doorbell (A) toward
the back plate (1) and snap into position.

Operation

1
Selecting a tune
The wireless push button (B) has two options for tune
selection: Play the selected "FRONT" door tune (Ding-
Dong) or play the "REAR" door designated tune (Ding)
The push button (B) comes from the factory
with no jumper (EE) installed on the pins.
This setting will play the "FRONT" door tune
(Ding-Dong).
To set the push button (B) to play the "REAR"
door tune (Ding), add the jumper (EE) to the
pins inside the push button (B).
NOTE: All doorbell models are designed to work with up
to 5 wireless push buttons (sold separately).

Care and Cleaning

Use a dry cloth to clean the doorbell and push button.
Do not use cleaners or polishes.
Do not use any fluids on the doorbell or push button.
A
NOTE: All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
CR2032
Push button (B) set as
"FRONT" door (Ding-
Dong) – no jumper (EE) on
the pins (Factory Default)
6
1
CR2032
EE
B
Push button (B) set as
"REAR" door (Ding) –
jumper (EE) is on the pins