Advertisement
SECTION IV
Note: For JFK double locking Uprights &
Cantilever Bars only
Locking Handle Assembly – 1 Pair
Snap Lock Assembly– 1 ea.
(Secondary Locking Device)
Note: For JFK Single locking Uprights only
JFK Spin - Snap Lock – 1 ea.
(Combination Locking Handle and Snap Lock)
Clamp Assembly – 1 ea.
(new part fits prior applications)
Fiberglass Rail with
Wood Veneer Assembly – 1 ea.
- c/w mounting hardware (2" bolts)
Note: You must use your existing 3" bolts, but
must exchange the old Nylock Nut with the
Nylock nut that is supplied with your new
Rail.
Cantilever Upright Tube – 1 ea.
- c/w Rail Pivots
Horizontal Adjusting Tube, Right – 1 ea.
- c/w Rail Pivots
Horizontal Adjusting Tube, Left – 1 ea.
- c/w Rail Pivots
High Adjusting Assembly, Right – 1 ea.
- c/w Rail Pivots & Locking Devices
High Adjusting Assembly, Left – 1 ea.
- c/w Rail Pivots & Locking Devices
365 / Instruction #8920101 Rev 4
SPARE PARTS
Obsolete Part
Pg. 11
Part# P355-25PR
Part# P355-140A
Part# P355-254A
Part# P355-248A
Part# 355-65
Part# 355-510
Part# 355-520
Part# 355-521
Part# 355-540
Part# 355-541
Advertisement
