Page 2
Thank you for purchasing the SA Sport “Just for Kids” Cantilever Bars from our line of Gymnastics equipment. We appreciate your business and value you as a customer. The “Just for Kids” Cantilever Bars come complete with cable tie-down, threaded sockets and Threaded Socket Adapters.
Page 3
Section I THE APPARATUS DESCRIPTION Just For Kids – Cantilever Bars The SA Sport Just for Kids Cantilever Bars includes the following items: • Base Assembly (#355-01) o c/w Tie-Down Hardware 1 pr • Just for Kids Upright Assembly (#355-312) o Assembled c/w Locking devices 2 ea.
Page 4
Cantilever Assembly literature for complete details CONNECTION BLOCK on Tie-down, Base fastening and assembly of all other related components for this Just For Kids Fig. 1 Apparatus. Fig. 2 – Uprights and Base Tube Assembled 365 / Instruction #8920101 Rev 4 Pg. 4...
Page 5
6. Align the Base Legs with the numbers on the sides facing away from the center. Install the uprights as shown in Figure 7 & 8 so that the upright is centered with the Number “0”. Fig 7 365 / Instruction #8920101 Rev 4 Pg. 5...
Page 6
CANTILEVER BAR UPRIGHTS SPIN LOCK HANDLE SPIN-SNAP LOCK 3” BOLT (Discard 2” bolts supplied with Rail) SNAP LOCK Fig. 9 BASE UPRIGHT Proceed to the Cable Tie down & Floor Anchoring Section. 365 / Instruction #8920101 Rev 4 Pg. 6...
Page 7
Strike the setting tool or punch with a hammer repeatedly, to expand the anchor in the hole FIG 2 (FIG 2). When securing equipment to floor anchors using bolts, a torque value of 20 ft lbs is recommended. 365 / Instruction #8920101 Rev 4 Pg. 7...
Page 8
QUICK LINK CONNECTION Fig. 11 Do not over tighten the turnbuckles as this may warp or damage the uprights, see note TURNBUCKLE CONNECTION TO THREADED SOCKET ADAPTORS on subsequent page, about Adjustments. (FLOOR ANCHORS) 365 / Instruction #8920101 Rev 4 Pg. 8...
Page 9
Equipment, this also applies to the Base Uprights Spin-Snap Locks. Never add any padding or tape to the bar surfaces. BASE UPRIGHTS SPIN-SNAP LOCK SNAP LOCK Fig. 12 LOCKING HANDLE 365 / Instruction #8920101 Rev 4 Pg. 9...
Page 10
8. Always inspect this equipment for loose fittings and parts. Replace any worn, defective or missing parts. 9. Always inspect this equipment for improper or unsafe installation. If in doubt, do not use this equipment. 365 / Instruction #8920101 Rev 4 Pg. 10...