Table of Contents
Advertisement
MIXINg boWl
12
MIXINg boWl
bowl Access Panels
Step 1:
Use a 10mm socket head to remove four (4) 6mm bolts, washers & lock washers. Remove both (R-L) bowl access panel doors from the
lower body wrap. Use a vacuum to clean seed and dust from underneath the mixing bowl. Check door gaskets for wear, replace if needed. Replace
both access panel doors on the lower body wrap.
Step 2:
Always use a vacuum
(not compressed air) to
safely clean the machine.
Hide quick links:
Advertisement
Table of Contents
