Rear Panel; Power Up The Z-Tone Di - IK Multimedia Z-TONE DI User Manual

English

Rear panel

1
1. 9V battery compartment. If the battery is installed and P48 phantom power is provided on the balanced out,
the +48V will have priority over battery.
2. Unbalanced output - Electronically buffered, grounded unbalanced output.
3. Balanced output - High performance transformer coupled balanced output with ground lift option.
4. GND LIFT - when the GND LIFT switch is depressed, the ground connection is interrupted.
5. PAD -20dB - The attenuation button increases the operating range of the Z-TONE DI. By activating the PAD,
the Z-TONE™ control will be bypassed.

1 Power up the Z-TONE DI

Z-TONE DI runs off a 9V battery for easy portability, but can also be powered by +48v phantom power from
your mixer or interface to run longer sessions without worries. If the battery is installed and P48 phantom power
is provided on the balanced out, the +48V will have priority over battery.
The front ON LED will turn on when the input jack is inserted and the unit is powered either from battery or 48V.
2 3
5
4 5