Specifications; Warranty; Support And More Info - IK Multimedia Z-TONE DI User Manual

English

4 Specifications

Audio specs
I/O Gain: Unitary, from 1/4" input JACK to both 1/4" and XLR outputs when GAIN is at 0dB and Z-TONE at the
SHARP position.
Gain Range: From -8dB to +8dB
Input impedance - Z-TONE set on PASSIVE mode: Variable from 1MΩ down to 2.2kΩ
Input impedance - Z-TONE set on ACTIVE mode: Approx 20kΩ
Output impedance, unbalanced out: 56Ω
Output impedance, balanced out: 600Ω
Max input level before clipping: +13dBm when powered by 48V phantom,+9dBm when powered by 9V battery
PAD: -20dB
Dynamic Range: better than 114dB(A) for both outputs, input gain at 0dB
Total Harmonic Distortion, balanced output, 1kHz, +4dBm input: 0.0033% (PURE), 0.2% (JFET)
Total Harmonic Distortion, unbalanced output, 1kHz, +4dBm input: 0.00055% (PURE), 0.2% (JFET)
Frequency response: from 5Hz to 30kHz -1dB
Phase deviation: 0° +/-10° from 20Hz to 20kHz
Power
Phantom power: +48V phantom on Balanced output. +48V phantom has priority over installed battery.
Battery power: 9V
Current consumption from P48 phantom power source: 6.5mA

Warranty

For detail on your product's warranty, please visit:
www.ikmultimedia.com/warranty
for the complete warranty policy.

Support and more info

www.ikmultimedia.com/support
www.ikmultimedia.com/products/ztonedi
12