10. LIFE OF PARTS
Magnetic head : 500,000 passes
11. MAINTENANCE METHOD
When replacing parts, exchange the card reader unit.
12. CAUTIONS ON THE USE
Please be noted that we do not guarantee proper performance of the
card reader if it is used other than the indicated specification range.
12.1 At the installation
(1) Do not drop or bump anything against a card reader.
Otherwise, failure may be the result.
(2) Do not touch the P.C.B. with bear hands.
(3) Be sure to install on a flat surface so as to prevent any force to be
applied to the card reader at the installation.
(4) Installation of a card guide plate at the both (front and back) sides of
the card running part may reinforce stability.
(5) The card reader should avoid installation of the following environment.
·
Watery, humid or dusty place.
·
Near machines which generate magnetic field or inducted noise.
(printer,LED display, CRT etc.)
·
Place which gets direct sunlight.
*Condition ·············· In a clean office room.
In damp or dusty atmosphere, the life may be
1/3 to 1/5 of the above figure.
8