Parts And Their Functions; Front Panel; Rear Panel - Panasonic AJ-PCD35уо Operating Instructions Manual

Parts and their Functions

Front Panel

(1)
(1)Power Indicator
This indicator lights up in green when the P2
drive is running.
(2)Status Indicator
This indicator blinks in green during access to
a P2 card.
<Note>
Do not remove the P2 card during access of
the card, otherwise files may be corrupted, or
the P2 card may fail.
(3)Card Slots
The P2 drive's card slots are designed for P2
cards.
The P2 drive does not operate with cards
other than P2 cards.
(4)EJECT Button
To remove a P2 card, press this button so that
the button pops out, then press it in again.
<Note>
For Macintosh only: To remove a P2 card,
drag the icon of the P2 card to "Trash," and
then press the EJECT button after confirming
that the P2 card icon disappears.
8
(2) (3) (4)

Rear Panel

(1) (5)
The picture shows the rear panel with its cover
removed.
(1)PCIe interface connector
This connects a PCI Express cable.
<Note>
Ensure that both the P2 drive and the
personal computer are switched off when
connecting the cable.
(2)DC IN 16V Socket
For external use of the P2 drive, connect an
AC adapter to this socket.
For the AJ-PCD35EJ only: For external use of
the P2 drive, connect the power switch box to
this socket.
(3)DC IN 12V Socket
To use the P2 drive mounted in a personal
computer, connect one of the power supply
connectors inside the personal computer to
this socket. (See page 14)
<Note>
Do NOT supply power to both the DC IN 12V
socket and DC IN 16V socket at the same
time.
(4)Cable Clamp
Use this clamp to secure the AC adapter cable
when connecting the P2 drive to a personal
computer for external use of the Drive.
For the AJ-PCD35EJ only: Use this clamp to
secure the power switch box cable when
connecting the P2 drive to a personal
computer for external use of the drive.
(5)Antitheft Lock
A commercially available antitheft cable can
be connected to this lock.
DC IN 16V
DC IN 12V
(4) (2) (3)