Table of Contents
Advertisement
Available languages
Available languages
Charging Instructions
1. Settings are made by pressing the MODE-button. After about
two seconds the charger activates the selected program. The
selected program will be restarted next time the charger is
connected.
2. To turn off the charger by pressing and holding the MODE-
button for 3 seconds.
3. To restart the charger by pressing and holding the MODE-
button for 3 seconds.
Step 1: Check the electrolyte level
Prior to charging the battery, remove the vent caps and check the
electrolyte level (not required on sealed & maintenance free bat-
teries). The electrolyte should be 6mm (1/4") above the battery's
plates. If low, top up with distilled water to the correct level and
refit the vent caps.
48
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Multiload 5 and is the answer not in the manual?
Questions and answers