Cutting The Roll Paper - Epson SC-P9500 Series User Manual

SC-P9500 Series/SC-P7500 Series User's Guide
O
Insert the leading edge of the roll paper into the
paper feed slot, and continue to feed until you
hear a sound.
P
When auto paper feed is set to Off, insert the
leading edge of the roll paper into the paper feed
slot, and feed until the leading edge extends out
of the printer.
Make sure that the roll paper is free of slack and
the end is not folded.
Basic Operations
Q
Close the roll paper cover.
R
Check the media type.
"Setting Loaded Paper" on page 30
U

Cutting the roll paper

The printer is equipped with a built-in cutter. You can
cut roll paper after printing by using one of the following
methods.
❏ Auto Cut:
The cutter cuts automatically at a determined
position each time a page is printed in accordance
with the setting of the printer driver or control
panel menu.
❏ Manual cut:
The cutting position is specified on the control
panel, and then the roll paper is cut. A cutline is
printed for manual cutting and can be used as a
guide when cutting paper using the built-in cutter.
25