Epson SC-P9500 Series User Manual page 104

SC-P9500 Series/SC-P7500 Series User's Guide
Settings item
Advanced Paper Settings
Confirm ICC profile
Confirm Color Density
Paper Thickness
Platen Gap
Paper Suction
Drying Time
Paper Size Check
Skew Reduction
Paper Eject Roller
Paper Feed Offset
Restore Default Settings
Change Paper Type/Paper Size
Paper Type
Paper Size
Poster Board
Menu List
Setting/Additional Explanation
Displays the ICC profile name.
This is only displayed when the optional PS unit is connected and a custom paper
is set.
Displays the Color Density.
This is only displayed when the optional PS unit is connected and a custom paper
is set.
0.01 - 1.50 mm (0.01 mm units)/0.4 - 59.1 mil (0.1 mil units)
This item is only displayed for Custom Paper Setting.
Auto, 1.2, 1.6, 1.9, 2.1, 2.4
Select a wider setting if print results are scratched or smudged.
-4 - +3
Thin or soft paper may not be fed correctly. If this occurs, reduce the setting.
Drying Time per Pass, Drying time per page
You can set the drying time for each print head movement (pass) or the drying
time for each page.
On, Off
When this is set to On, the width of the loaded paper is automatically detected.
On, Off
Select whether to enable (On) or disable (Off) paper skew reduction while printing
on paper.
Auto, Use, Do Not Use
-1.0 - +1.53%
This item is only displayed for custom paper.
The advanced paper settings are saved for the paper type. Select this when you
want to restore the default settings.
This item is not displayed when Custom Paper is selected.
Recently Used Paper, Recently Registered Paper, More Paper Types (Photo Paper,
Proofing Paper, Fine Art Paper, Matte Paper, Campus Paper, Plain paper, Others,
Custom Paper)
A Series, US-ANSI, US-ARCH, B Series (ISO), B Series (JIS), Photo Series, Others,
User-Defined
104