Environment; Transport; Warranty; Eu Declaration Of Conformity - Festool C 12 Li Original Operating Manual And Spare Parts List

C 12 Li, C 15 Li
GB
12

Environment

Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally responsible recycling
centre. Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Return used or faulty battery packs to your local
specialist retailer, Festool after-sales service or a
designated public waste management facility. The
battery packs will then be recycled. (Observe the
regulations applicable in your country). The batter-
ies must be discharged on return.
EU only: European Directive 91/157/EEC stipulates
that faulty or used battery packs/batteries must be
recycled.
13

Transport

The equivalent amount of lithium in the LiIon bat-
tery pack is less than the applicable limit value and
certified as per UN manual ST/SG/ AC.10/11/rev. 3
part III, subsection 38.3. The LiIon battery pack is
therefore not subject to national and international
dangerous goods regulations, neither as an individ-
ual component nor as a fitted machine component.
However, dangerous goods regulations may apply
when several battery packs are transported, in
which case you may have to fulfil special conditions.
Refer to ADR special regulation 230 for more infor-
mation relevant for the EU.
14

Warranty

We offer a warranty for material and production de-
fects for all our tools in accordance with the locally
applicable legal provisions, but for a minimum of 12
months. Within the EU member states, the warran-
ty period is 24 months (verification through invoice
or delivery note). Damage caused by the operator,
natural wear, overloading, incorrect handling or
through the use of the equipment not specified in
the operating manual, or damage which was known
at the time of purchase, is not covered by the war-
ranty. Furthermore, damage caused by the use of
non-original accessories and consumable materi-
als (e.g. sanding pads) is also excluded.
Complaints can only be accepted if the tool is re-
turned while still assembled to the supplier or an
authorised Festool Customer Service workshop.
Keep the operating manual, safety instructions,
spare parts list and purchase receipt in a safe
place. Otherwise the current warranty conditions of
the manufacturer shall apply.
16
Note
Due to continuous research and development work,
we reserve the right to make changes to the techni-
cal content of this documentation.
15

EU Declaration of Conformity

Cordless drill
C 12 Li
C 15 Li
Year of CE mark: 2010
We declare under sole responsibility that this prod-
uct complies with the following directives and stan-
dards:
2006/42/EC, 2004/108/EC,
03.01.2013), EN 60745-1, EN 60745-2-1, EN 60745-
2-2, EN 55014-1, EN 55014-2.
Charger
TRC 3
Year of CE mark: 2007
We declare under sole responsibility that this prod-
uct complies with the following directives and stan-
dards:
2004/108/EC, 2006/95/EC,
03.01.2013), EN 60335-1, EN 60335-2-29, EN
61000-3-2, EN 61000-3-3, EN 61204-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
19.12.2012
REACh for Festool products, its accessories and
consumable materials:
REACh is a European Chemical Directive that came
into effect in 2007. As "downstream users" and
product manufacturers, we are aware of our duty to
provide our customers with information. We have
set up the following website to keep you updated
with all the latest news and provide you with infor-
mation on all the materials used in our existing
products:
www.festool.com/reach
Serial no.
498349
498351
2011/65/EU (from
Serial no.
494635, 494636, 494637
2011/65/EU (after