Environment - Festool DWC 18-2500 Original Instructions Manual

To open the Systainer
Turn the T-loc [SYS-b-1] to this posi­
tion.
To lock the Systainer
Turn the T-loc [SYS-b-1] to this posi­
tion.
To connect two Systainers
Place one Systainer on the top of the other
(Fig. [SYS a]).
Turn the T-loc [SYS-b-1] to one of
this positions (Fig. [SYS-b]).
The Systainers are connected and locked.
A new generation Systainer is con­
nectable on top of a previous genera­
tion Systainer by the four latches of
the previous Systainer.
SYS-b-1

14 Environment

Do not dispose of the device together with do­
mestic waste! Dispose of machines, accesso­
ries and packaging at an environmentally re­
sponsible recycling centre. Observe the valid
national regulations.
Battery Disposal
Risk of fire or injury
► Do not attempt to disassemble the battery
► Prior to disposal, protect exposed termi­
The RBRC
Corporation) Seal on nickel cadmium (NiCd),
nickel metal hydride (NiMH) or lithium-ion
(LiIon) batteries (or battery packs) indicates
SYS-a
Festool is voluntarily participating in an indus­
try program to collect and recycle these batter­
ies at the end of their useful life, when taken
out of service in the United States or Canada. In
some areas, it is illegal to place spent batteries
in the trash or municipal solid waste stream
and RBRC Program provides an environmental­
ly conscious alternative.
Please call 1-800-822-8837 for information on
battery recycling and disposal bans/restrictions
in your area, or return your batteries to the
Festool Service Center for recycling. Help pro­
tect our environment and conserve natural re­
SYS-b
sources!
WARNING
or remove any component projecting from
the battery terminals.
nals with heavy insulating tape to prevent
shorting.
(Rechargeable Battery Recycling
TM
English
17