Table of Contents
Advertisement
Security
Security Key
Ethernet Configuration
LAN IP Address
Subnet Mask
Default Gateway Address
3.2.5. System Configuration Windows - Software Download
The Firmware Update configuration window allows viewing of the FTP location of new firmware. The default values
for the FTP Host Name, User Name, Password, Image Path, Image Name appear in the window. To access the
Firmware Update window, click on Update button. The Firmware Update configuration window appears as
following.
The BU uses the file transfer protocol (FTP) to download the Operating image from the HPC. An FTP server utility
is required to perform the data transfer between the BU and HPC.
To enable firmware updates:
1. Enter the host PC's IP address, User Name, Password, Image Path, and Image Name
data-entry fields.
2. Click Update Firmware to store the new firmware changes.
Note: The red reminders only appear if you update setting in Configuration/System Setup page.
3.2.6. System Log Windows
The System Log window logs system events for detail descriptions of system status log. This is very useful to track
system. It shows important successful states and critical system logs.
Initial Setup
Specifies the security policy in AES, or TKIP
Specifies key setting related to security policy.
Maximum length is 64 characters.
Description
Specifies the IP address of the BU.
Specifies the subnet mask for the BU.
Specifies the default gateway for the BU.
Table 3-2 Descriptions of setting parameters
Figure 3-7 Software Download Windows
A-6000 High Speed, Long Range Ethernet Wireless Bridge
3-6
Advertisement
Table of Contents
