ZyXEL Communications ZyXEL ZyAIR A-6000 User Manual page 31

To update configuration files:
1. Enter the configuration updates or changes in the appropriate configuration fields.
2. Click Update.
REBOOT BU to reboot system to make the changes effective.
3. Click Reboot BU to make the changes effective.
The web server loses connectivity with the Web Server as the BU reboots. To reestablish the connection with the
Web Server, wait until the BU has completed rebooting and navigate to the Web Server to resume
System Configuration
User Name
Password
Telnet Enable
Access Control
Wireless Configuration
SSID
Country
RF Channel Frequency
Data Rate (Mbps)
Transmit Power
Beacon Interval (20 - 1000)
Data Beacon Rate (1 - 255)
Fragment Length (2346)
RTS/CTS Threshold (256 - 2346)
Initial Setup
After click Update, there will appear red string alarm to let you press the
Description
Specifies the user name.
Specifies the password.
Use the checkbox to allow telneting into the BU.
Specifies the RU's MAC address allowed to join.
Description
Identification of the BU. Enter a number or
address between 1 and 32 characters in length
that the RU is associating with. Use the System
Name field to uniquely identify each BU..
Display country name; it's related to channel
frequency base.
Select the desired frequency of operation from
the drop-down menu, or choose SmartSelect.
The radio frequencies that appear in the Radio
Channel drop-down menu are dependent on the
wireless mode selection. Select "SmartSelect" to
automatically search through the frequency list to
find a used or less congested channel. It only
works on AP system. AC will scan the right
channel.
Specifies rate of data transmission. Select the
desired rate from the drop-down menu. The Best
selection will adapt the rate to the best available.
Value unit in Mega bit per second
Specifies the level of transmit power. Choose the
value of the transmit power from the dropdown
menu. Decrease the transmit power if more than
one AP is co-located using the same channel
frequency. Maximum transmit power depends on
channel frequency. In selected item, 'Full' means
maximum transmit power; 'Half' means Full –
3dB; 'Quarter' means Full –6dB; 'Eighth' means
Full –9dB; and 'Minimum' means 0dB.
Specifies the beacon interval value. Enter a value
between 20 and 1000. It only works on AP
system.
Specifies the Data Beacon Rate. Enter a value
between 1 and 255 that specifies the delivery
traffic indication message (DTIM). It only works
on AP system.
Shows the fragment length.
Specifies the value of the RTS/CTS threshold.
Enter a value between 256 and 2346.
A-6000 High Speed, Long Range Ethernet Wireless Bridge
3-5