Programming The Thermostat - POLYPOOL PP1465 User Instructions

4.
PROGRAMMING
THERMOSTAT
Thermostat programming allows setting of the
switch-on hours and selection of the desired
temperatures for each programming band. The
thermostat can be programmed in daily/weekly
mode and can manage 6 daily schedules and two
temperature levels. The temperature set for a specific
time interval is valid until the next time interval is
activated. For example, the thermostat keeps the
programmed temperature for the switch-on time P1
until the switch-on time P2 is activated.
Note! The thermostat software recognises only
increasing consecutive progressions to be set, based
on the series number (P1; P2; etc.) of the ignitions.
For example, P3 cannot have a lower time than the
one associated with P2
With the factory settings the thermostat operates with
the following programming for all the days of the week:
THE
The following diagram shows the temperature pattern
based on the factory settings for 24 hours a day.
P1 7:00 20°C
P2 09:00 17°C
P3 12:30 20°C
P4 15:00 19°C
P5 17:30 22°C
P6 23:00 17°C