POLYPOOL PP1465 User Instructions page 13

5.
FACTORY VALUES COMBINED
WITH THE BUTTONS
(-) AND (+)
The temperature values 18°C and 22°C are assigned
to the buttons (-) and (+) in the factory, with which
it is possible to manually and temporarily modify
the program in operation (section 5.1).
These two factory values can be changed as follows:
-
Temperature button ( ):press the button "SET", hold
it down and then press the (-) button once and then,
using the (-) and/or (+),buttons, set the temperature
to be combined with the (-)button. After setting the
temperature, press the "SET" button again to confirm
the temperature value and to return to the main screen.
(After approximately 10 seconds the adjustment just
completed will be automatically confirmed and the
thermostat will return to the main screen).
+
Button temperature (
hold it down and then press the (+) button once
and then, using the(-) and/or (+), buttons, set the
temperature to be combined with the (+) button.
After setting the temperature, press the "SET" button
again to confirm the temperature value and return to
the main screen. (After approximately 10 seconds
the adjustment just completed will be automatically
confirmed and the thermostat will return to the main
screen).
To operate the thermostat so that it differs temporarily
from the program set (for example during holidays or
at certain times of the day), it is possible to choose
from the following options:
5.1 Changing the temperature
until the next ignition program
It is possible to manually force the program into
operation by pressing the (-) or (+) buttons. On the
):press the "SET", button,