POLYPOOL PP1465 User Instructions page 3

The thermostat ignition sensitivity can be
selected: ± 0.2°C (factory setting, recommended
for heating systems with radiator) or + 0/-0.2°C (this
setting is recommended for underfloor heating).
This configuration represents the temperature
difference between the adjusted value and the actual
temperature measured during the ignition process.
For example, if the factory setting is 20°C on the
thermostat, the device turns on the boiler at 19.8°C
or below this level and goes off at 20.2°C or above.
(Please refer to section 3.3 for the change of ignition
sensitivity from factory default of ± 0.2°C).
The thermostat is equipped with a pump protection
function which, in order to prevent the pump
from blocking, turns on the boiler for one minute
at 24 every day if the pump has not turned on in a
programmed way for more than 24 hours (for example
, outside the heating season). See the activation of the
pump protection function in Section 3.4.
Information shown on the LCD
display of the thermostat:
Manual
timer
control
indicator
Temperature
set
Flat
battery
Boiler
operational
Days
week
Clock
Manual
control
indicator
Program
number set
Ambient
temperature