Ip Alias Setup - ZyXEL Communications ZyXEL Prestige 310 User Manual

Field
Edit IP Alias
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm...] to save your
configuration, or press [Esc] at any time to cancel.

3.2.1 IP Alias Setup

You must use Menu 3.2 to configure the first network and move the cursor to the Edit IP Alias field and
press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and third network.
Pressing [Enter] opens Menu 3.2.1 - IP Alias Setup, as shown next.
Press Space Bar to Toggle.
Follow the instructions in the following table to configure IP Alias parameters.
Field
IP Alias Choose Yes to configure the LAN network for the Prestige.
IP Address Enter the IP address of your Prestige in dotted decimal notation
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
Internet Access
space bar to enable IP Multicasting or select None (default) to
disable it.
The Prestige supports three logical LAN interfaces via its single
physical Ethernet interface with the Prestige itself as the gateway for
each LAN network. Press the space bar to toggle No to Yes, then
press [ENTER] to bring you to menu 3.2.1
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
Figure 3-5
Table 3-3
Prestige 310 Broadband Sharing Gateway
Description
Menu 3.2.1 - IP Alias Setup
IP Alias Setup Menu Fields
Description
Example
Yes
No (default)
Example
Yes
192.168.2.1
255.255.255.0
3-7