Chapter 2 : Hardware Installation & Initial Setup; Front Panel Leds And Back Panel Ports; Front Panel Leds - ZyXEL Communications ZyXEL Prestige 310 User Manual

Hardware Installation & Initial Setup
This chapter shows you how to connect the hardware and perform the initial setup.
2.1

Front Panel LEDs and Back Panel Ports

2.1.1 Front Panel LEDs

The LEDs on the front panel indicate the operational status of the Prestige.
The following table describes the LED functions:
LEDs Function Indicator
PWR Power
SYS System
10M LAN LAN
100M LAN
Hardware Installation & Initial Setup
Figure 2-1
Table 2-1
Active
Status
Green On
Off
On
Flashing
Green Off
On
Flashing
Orange Off
On
Flashing
Prestige 310 Broadband Sharing Gateway
Front Panel
LED functions
Description
The power adapter is connected to the Prestige.
The system is not ready or failed.
The system is ready and running.
The system is rebooting.
The 10M LAN is not connected.
The Prestige is connected to a 10M LAN.
The 10M LAN is sending/receiving packets.
The 100M LAN is not connected.
The Prestige is connected to a 100Mbps LAN.
The 100M LAN is sending/receiving packets.
Chapter 2:
2-1