Prismatibro Prisma Light Ellie Manual page 7

GATEWAY INSTALLATION
Light pole
The gateway should be installed within 30 meters from the closest
Detect-luminaire.
The gateway will communicate wirelessly with the luminaries.
The installation should be done by the manufactorer or by someone
educated by the manufactorer.
1
Drill a hole, Ø 20 mm, for the power cable on the light pole
at prefered height.
2
Use the pole adaptor to drill the two mounting holes with a
Ø 3,5mm drill.
3
Mount the adaptor:
Use the supplied screws
Connect the power cable to backside of the Gateway:
4
Press down the coupling ring, and keep turning the ring (clock wise)
until you feel a "click". Now the connector is locked.
5
Mount the Gateway:
Use the supplied screws.
1
2
3
4
5
prismatibro.se | Prisma Light Ellie 7