Prismatibro Prisma Light Ellie Manual page 5

DEPLOYMENT AND USE
Prisma Light Constant
• The luminaire is equiped with a driver with a fixed level. The setting will
be made at the factory and can olnly be changed at the factory in Tibro.
Prisma Light Remote
DEPLOYMENT
• Power on the luminaire.
• Prisma Light Ellie should now
have the factory setting that
the customer choose when
they ordered.
• Prisma Light Ellie has have a PCB
with built in IR-communication.
Prisma Light Detect
DEPLOYMENT
• Power on the luminaire
When it starts up the luminaire will blink as it calibrates itself.
Before it is programmed by the customer -see installation manual control
systems - the luminaire will be att 40% when there is no detection and
50% at detection.
At this stage it doesn't communicate with other luminaires.
Prisma
USE
• The settings are changed with a
remote control.
Manual can be downloaded from:
www.prismatibro.se
prismatibro.se | Prisma Light Ellie
MANUAL
CONTROL SYSTEMS
5