Table of Contents
Advertisement
ELECTRICAL INSTALLATION
Only 230 V
• Prisma Light Ellie Constant
• Prisma Light Ellie Remote
• Prisma Light Ellie Detect
The luminaire should not be mounted or demounted with power on.
Supply voltage
Wattage
1. Mount the luminaire on the pole, adjust if necessary.
2. Connect the cable in the fuse holder.
3. Make sure that the Neutral-connection is connected properly.
Not done correctly may cause uncontrolled voltage in the installation.
4. Turn on the power
4
Prisma Light Ellie | prismatibro.se
110-230 V AC, 50 Hz.
5-20 W (40 W)
Advertisement
Table of Contents
