Configuring Source And Destination Addresses - ZyXEL Communications Prestige 652H/HW Compact Manual

LABEL
Edit Available
Service
Action for Matched
Packets
Log
Alert
Delete

5.8 Configuring Source and Destination Addresses

To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To
edit an existing source or destination address, select it from the box and click SrcEdit or DestEdit
from the previous screen. Either action displays the following screen.
Figure 21 Adding/Editing Source and Destination Addresses
The following table describes the fields in this screen.
Table 8 Adding/Editing Source and Destination Addresses
LABEL
Address Type
Start IP Address
Prestige 652H/HW
Table 7 Creating/Editing A Firewall Rule
Click this button to go to the list of available custom services.
Should packets that match this rule be blocked or forwarded? Make your choice from the
drop down list box. Note that Block means the firewall silently discards the packet.
This field determines if a log is created for packets that match the rule, don't match the
rule, both or no log is created.
Check the Alert check box to determine that this rule generates an alert when the rule is
matched.
Click Delete to remove this rule.
Do you want your rule to apply to packets with a particular (single) IP address, a range of
IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP address? Select an
option from the drop down list box
Enter the single IP address or the starting IP address in a range here.
DESCRIPTION
DESCRIPTION
25