ZyXEL Communications Prestige 128IMH User Manual page 66

Prestige 128IMH ISDN Modem/ Router/Hub
Single User Account
Telco
options :
Multilink
Idle Timeout
At this point, the SMT will ask if you wish to test the Internet connection. If you select Yes, your
Prestige will call the ISP to test the Internet connection. If the test fails, note the error message
that you receive on the screen and take the appropriate troubleshooting steps.
3-10
Please see the following section for a more detailed discussion
on the Single User Account feature. The default is Yes.
Transfer This field specifies the type of connection between the Prestige
Type and this remote node. Select 64K, Leased, or Modem.
The Prestige uses the PPP Multilink Protocol (PPP/MP) to
bundle multiple links in a single connection to boost the effective
throughput between two nodes. This option is only available if
the transfer type is 64K. See menu 11.2 for more details.
This value specifies the number of idle seconds that elapses
before the remote node is automatically disconnected. Idle
seconds is the period of time when no data is transmitted from
your Prestige. Administrative packets such as RIP are not
counted as data. The default is 300 seconds (5 minutes). This
option only applies when the Prestige initiates the call.
Internet Access