ZyXEL Communications P841C User Manual page 28

P841C Central-Side VDSL Modem
FIELD
vdsl auto upgrade NT
EEPROM flag
enet monitor flag
LT Ethernet speed
LT Ethernet full duplex flow
control
NT Ethernet speed
NT Ethernet full duplex flow
control
vdsl disconnect count
vdsl uptime
4.1.13 VDSL Autoupg Command
Type this command to show the VDSL auto upgrade status (without "on" or "off") or turn on/off auto upgrade.
When auto upgrade is on, the P841C will check the subscriber's modem VDSL modem code version and
automatically upgrade it if it is an earlier version than the P841C's.
4-8
This field shows the VDSL auto upgrade status ("on" or "off").
When auto upgrade is on, the P841C will check the
subscriber's modem VDSL version and automatically upgrade
it if it is an earlier version than the P841C's.
This field shows the Ethernet monitor flag status ("on" or
"off"). If this flag is on and the link is up) the P841C display
P841C and the subscriber's VDSL modem's Ethernet
statistics.
This field shows the P841C Ethernet port speed.
This field shows the P841C Ethernet port flow control status
("on" or "off").
This field shows the P841 (subscriber's VDSL modem)
Ethernet port speed.
This field shows the P841 (subscriber's VDSL modem)
Ethernet port flow control status ("on" or "off").
This field displays how many times VDSL connection has
been disconnected.
This field displays how long the VDSL link has been up.
vdsl autoupg [on|off]
DESCRIPTION EXAMPLE
off
off
Auto
on
Auto
on
0
0 secs
VDSL-Related Commands