Assembling Your Auto-Spiralizer - Ninja CT682SM Series Owner's Manual

ASSEMBLING YOUR
AUTO-SPIRALIZER
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
IMPORTANT: As a
safety feature, if the
Spiralizer Bowl and
Feed Chute Lid are not
properly installed, the
timer will display "- --"
and the motor will
be disabled.
NOTE: To fit properly, the
tabs on the sides of the
Blade Disc must align with
the gaps on the top of the
Collecting Bowl.
NOTE: The Spiralizer
accessory is only intended
for processing of fruit and
vegetables. Processing hard
ingredients such as cheese,
1
Place the unplugged motor
meats, and dried foods is
base on a clean, dry, and
not recommended.
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into a
wall outlet.
25 SG +65 800 120 5111 | MY +60 1800 803 915
2 Lower the Spiralizer Bowl 4 Place the Collecting Bowl inside the
onto the motor base.
3 Rotate the Spiralizer Bowl 5 Choose your Blade Disc, making sure to
clockwise until it clicks into
place.
6 Install the Blade Disc onto the top of the
Spiralizer Bowl, aligning it over the gear post.
handle it carefully.
Collecting Bowl. The rim of the Blade Disc
should sit flush against the top of the bowl,
and the tabs on the sides of the Blade
Discs must align with the slots on the top
of the Collecting Bowl.
7 Assemble the Feed Chute Lid on top of
the Spiralizer Bowl. Turn the lid clockwise
onto the Spiralizer Bowl, aligning the gray
tabs on the lid with the front of the bowl.
When the unit is connected to power and
the container is correctly assembled onto
the motor base, press the Power symbol to
turn unit on. The GO button will illuminate,
indicating the unit is ready for use.
ninjakitchen.sg | ninjakitchen.my 26