Using Your Single-Serve Cup - Ninja CT682SM Series Owner's Manual

USING YOUR
SINGLE-SERVE CUP
IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
TIP: To learn more about
the unit's programs, refer
to page 11.
NOTE: Pre-set programs
have pauses and changes in
speed throughout the cycle.
1
Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into
a wall outlet.
17 SG +65 800 120 5111 | MY +60 1800 803 915
2 Add ingredients to the 3 Install the Pro Extractor Blades Assembly
Single-Serve Cup. DO
NOT add ingredients past
the MAX LIQUID line on
the cup.
onto the top of the cup. Twist the lid
clockwise until it's sealed tightly.
4 Turn the Single-Serve Cup upside down
and install onto the motor base. Align
the tabs on the cup with the slots on the
base, then twist until it clicks into place.
When the unit is connected to power
and the container is correctly locked onto
the motor base, press the Power symbol
to turn unit on. The available program
buttons will illuminate and the unit will be
ready for use.
ninjakitchen.sg | ninjakitchen.my 18