Personnel Authorized To Carry Out Conversion - Endress+Hauser Promag Installation Instructions Manual

Order structure
Conversion kits for Promag, Promass, Prosonic Flow 500-digital
DKZ002–****FGA***
DKZ002–AA**FGA***+P8
DKZ002–GR**FGA***+P8
DKZ002–AABAFHA***+P8
DKZ002–GRBAFHA***+P8
2

Personnel authorized to carry out conversion

Authorization to carry out a conversion depends on the measuring device' s approval type. The
table below shows the authorized group of people in each case.
Measuring device approval
Without approval
With approval (e.g. IECEx)
For custody transfer
1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/modification must be performed under supervision.
Endress+Hauser
Expansion
Promag, Promass Prosonic Flow 500-
digital transmitter with display to
Promag, Promass Prosonic Flow 500-
digital transmitter with display and
WLAN interface
Promag, Promass Prosonic Flow 500-
digital transmitter with display to
Promag, Promass Prosonic Flow 500-
digital transmitter with display and
WLAN interface including external
antenna
Promag, Promass Prosonic Flow 500-
digital transmitter with display to
Promag, Promass Prosonic Flow 500-
digital transmitter with display and
WirelessHART interface including
external antenna
Conversion kit (contents)
1 × WLAN display with ribbon cable
and WLAN interface,
1 × tie-on label,
1 × conversion instructions
1 × WLAN display with ribbon cable
and WLAN interface including external
antenna,
1 × tie-on label,
1 × conversion instructions
1 × WirelessHART display with ribbon
cable and WirelessHART interface
including external antenna,
1 × tie-on label,
1 × conversion instructions
Personnel authorized to carry out conversion
1, 2, 3
1, 2, 3
4
EA01158D
1)
5