Identifying The Hiqnet Network Connector On Vi Consoles - SoundCraft Vi Series Quick Start Manual

Identifying the HiQnet Network connector on Vi consoles

Vi1
The HiQnet port is on the rear of the control surface, adjacent to the rear USB
sockets.
Important! The HiQnet port on early Vi1 consoles (serial numbers lower than
30210956) is only able to drive short cable lengths, max recommended length 1
metre (3 feet). Therefore use a network switch positioned close to the rear of the
console to extend the cable length if required.
Vi2 / 4 / 6
The HiQnet port is located on the rear of the Control Surface, adjacent to the MIDI
ports. The port is capable of driving standard Ethernet distances of up to 100m.
Vi V4.5 Quickstart Guide.doc Page 6