Figure 31 Wireless Settings: Access Point; Table 10 Wireless Settings: Access Point - ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 User Manual

Figure 31 Wireless Settings: Access Point

The following table describes the labels in this screen.

Table 10 Wireless Settings: Access Point

Operation Mode
SSID
Hide SSID
Channel
Chapter 6 Wireless Screens
Select the operation mode from the drop-down list. The options are Access Point
and Access Point + Bridge.
Wireless stations associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 printable characters) for the wireless LAN.
Spaces are allowed.
Note: If you are configuring the G-560 from a computer connected
to the wireless LAN and you change the G-560's SSID,
channel or security settings, you will lose your wireless
connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the
G-560's new settings.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through passive scanning using a site survey tool.
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box.
Refer to the chapter on wizard setup for more information about channels.
ZyXEL G-560 User's Guide
59