This chapter describes the Maintenance screens.
7.1 Maintenance Overview
Use these maintenance screens to change the password, view logs, back up or restore the G-
560 configuration and change the web configurator language.
7.2 Configuring Password
To change your G-560's password (recommended), click SETTINGS > MANAGEMENT.
The screen appears as shown. This screen allows you to change the G-560's password.
If you forget your password (or the G-560 IP address), you will need to reset the G-560. See
the section on resetting the G-560 for details.
Figure 54 Management: Password
The following table describes the labels in this screen.
Table 21 Management: Password
LABEL
Current Password Type in your existing system password (1234 is the default password).
New Password
Chapter 7 Management Screens
Management Screens
DESCRIPTION
Type your new system password (up to 30 printable characters). Spaces are not
allowed.
Note that as you type a password, the screen displays an asterisk (*) for each
character you type.
ZyXEL G-560 User's Guide
C
H A P T E R
7
85