Supermicro SUPERO X9DRW-3LN4F+ User Manual page 15

Motherboard Features
CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
•
Dual Intel E5-2600(v2) Series Processors (Socket
®
R LGA 2011); each processor supports two full-width
Intel QuickPath Interconnect (QPI) links (with support
of up to 8.0 GT/s per QPI link and with Data Trans-
fer Rate of up to 16 GB/s direction peak bandwidth
per port).
Note: For Intel E5-2600(v2) processor support,
BIOS version 3.0 or above is required.
•
Integrated memory controller supports up to 1.5 TB
of Load Reduced (LRDIMM), 768 Gb of Registered
(RDIMM) or 128 GB of Unbuffered (UDIMM) ECC/
Non-ECC DDR3 800/1066/1333/1600/1866 MHz
240-pin 4-channel memory in 24 DIMM slots.
Note 1: 1866 MHz memory speed is dependent
on Intel E5-2600v2 CPUs.
Note 2: For the latest memory updates, please
refer to the Tested Memory List posted on our
website (http://www.supermicro.com/products/
motherboard).
•
Virtualization: VT-x, VT-d, and VT-c
•
Intel® C606 PCH
•
One (1) SMC-Proprietary WIO-R slot (SXB2),
•
One (1) SMC-Proprietary WIO-L slot
(SXB1A/1B/1C/1D)
•
Nuvoton BMC Video Controller
•
One Intel i350 Gigabit (100/1000 Mb/s) Ethernet
Dual-Channel Gb Controller for LAN1/LAN2 ports.
•
One Intel i350/X540 10-Gigabit Ethernet Dual-Channel
Controller for LAN3/LAN4 ports (GLAN Ports for
-3LN4F+; 10GLAN Ports for -3TF+)
•
Nuvoton Base-board Controller (BMC) supports
IPMI_LAN 2.0
1-7
Chapter 2: Overview