Call Scheduling; Chapter 47 Call Scheduling; Introduction To Call Scheduling; Figure 462 Schedule Setup - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

C
H A P T E R
Call scheduling allows you to dictate when a remote node should be called and for how long.

47.1 Introduction to Call Scheduling

The call scheduling feature allows the ZyWALL to manage a remote node and dictate when a
remote node should be called and for how long. This feature is similar to the scheduler in a
videocassette recorder (you can specify a time period for the VCR to record). You can apply
up to 4 schedule sets in Menu 11.1 - Remote Node Profile. From the main menu, enter 26 to
access Menu 26 - Schedule Setup as shown next.

Figure 462 Schedule Setup

Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling
conflicts. For example, if sets 1, 2, 3 and 4 are applied in the remote node, then set 1 will take
precedence over set 2, 3 and 4 as the ZyWALL, by default, applies the lowest numbered set
first. Set 2 will take precedence over set 3 and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a
remote node.
ZyWALL 2WG User's Guide

Call Scheduling

Menu 26 - Schedule Setup
Schedule
Set # Name
------ ------------------
1 _________________
2 _________________
3 _________________
4 _________________
5 _________________
6 _________________
Enter Schedule Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
47
Schedule
Set # Name
------ ------------------
7 _________________
8 _________________
9 _________________
10 _________________
11 _________________
12 _________________
681