Chapter 10 Wireless LAN
Figure 134 WIRELESS > Wi-Fi > Wireless Card
The following table describes the labels in this screen.
Table 55 WIRELESS > Wi-Fi > Wireless Card
LABEL
Enable
Wireless Card
Bridge to
224
DESCRIPTION
The wireless LAN through a wireless LAN card is turned off by default, before you
enable the wireless LAN you should configure some security by setting MAC filters
and/or 802.1x security; otherwise your wireless LAN will be vulnerable upon enabling
it. Select the check box to enable the wireless LAN.
Select LAN to use the wireless card as part of the LAN.
Select DMZ to use the wireless card as part of the DMZ.
Select WLAN to use the wireless card as part of the WLAN.
The ZyWALL restarts after you change the wireless card setting.
Note: If you set the wireless card to be part of the LAN or DMZ, you
can still use wireless access. The firewall will treat the wireless
card as part of the LAN or DMZ respectively.
ZyWALL 2WG User's Guide