Figure 73 Tutorial Example: Bandwidth Management Summary; Figure 74 Tutorial Example: Bandwidth Management Class Setup - ZyXEL Communications ZyXEL ZyWALL 2WG User Manual

Chapter 4 Tutorial

Figure 73 Tutorial Example: Bandwidth Management Summary

7 Click the Class Setup tab.
8 Select the WAN1 interface and click the Add Sub-Class button to create a rule for VoIP
traffic.

Figure 74 Tutorial Example: Bandwidth Management Class Setup

9 Enter a descriptive name ("WAN1_VoIP" for example), the maximum bandwidth
allowed and a priority for VoIP traffic. The higher the number, the higher the priority.
10Enable this filter and select the SIP service. Make sure you also use the ALG screen to
turn on the SIP ALG.
11Leave the IP address and subnet mask fields blank, so that the filter will be applied to any
outgoing traffic through the WAN port. Click Apply.
130
ZyWALL 2WG User's Guide